![]() Is distortion present on headphone output? If so, try turning down the AMP ENVELOPE AMOUNT. If only a single cable is connected to the main outputs, voices panned to the opposite side will sound more quietly. *PAN SPREAD sequentially pans the voices further into the stereo field left to right as the voice count increase. If the problem is only present with a single cable connected to the main output, set PAN SPREAD to minimum. Some Voices Sound Quiet, Compare to Others If so, proceed to sections C, D, E, or F based on the problem description.Ĭ. If calibration completes and no problem is detected, reconnect audio cables to the instrument’s main outputs. If calibration stalls/does not complete, take note of the text on the display. Start Calibration: Hold MANUAL and press 0.Ĭalibration will start and progress will be shown on the screen. Audio Issues (voices not triggering or not sounding correctly) Next, proceed to the appropriate section below according to the issue described: Initialize a basic program: hold MANUAL and press WRITE.Ĭonnect a set of headphones to the headphone output.Press GLOBAL twice to exit the global menu. No confirmation of the reset will be shown on-screen, but the global parameters will be set to the factory default. Reset global parameters: hold GLOBAL and press WRITE. ![]() ![]() Start by removing all connections (MIDI/USB, pedals, audio) from the rear of the instrument except for power. If the unit boots but has an issue, perform initial settings first: Send the main OS file to the synth via MIDI IN port (USB cannot be used in bootloader). Hold WRITE and apply power to the instrument.Ī rotating animation will be shown on screen indicating bootloader mode is active.
0 Comments
Leave a Reply. |